|
PH-2B II INFRARED SAUNA WRAP
LOW-VOLTAGE FULL-ENCLOSURE
INFRARED ENERGY WRAP 2 Heating Zone
$470.00
Order Now
The Infrared Sauna Wrap PH-2B II is a low-voltage
FIR device, with 2 body heating zones simultaneously controlled,
suitable for professional use at a spa, weight loss center or beauty
salon. Sturdy and made for frequent operation. Provides a complete
sauna experience. The Infrared Sauna Wrap is also portable and easy
to clean, for travel or home use. The direct heat from the blanket
allows for gentle radiant relaxation of the muscles and controlled
perspiration .
INFRARED Sauna Wrap PH-2B II SYSTEM
COMPOSITION AND FUNCTIONS:
The PH-2B II Infrared Sauna Wrap is
composed of a control box, a thermal blanket which enfolds the body
in a full enclosure, a power cord and 2 connection leads. |
Control Box:
|
adjusts and controls the temperature
and timer settings of the thermal blanket. |
Thermal Blanket:
|
conducts heating to the body. Space Carbon
Fiber, covered by a layer of PU (polyurethane) fabric |
Power Cord: |
supplies power to the control box.
|
Connection Leads (2): |
connect the thermal blanket to the control box.
|
|
|
PANEL DISPLAY AND
FUNCTIONS OF THE KEYS: |
|
ON/OFF |
Switch the system 'ON' or 'OFF'
|
Temperature Key () |
Press
to increase or press
to decrease the temperature, 1° C for each time
pressed. |
|
Timer Key (
)
|
Press
to increase or press
to decrease the time, 5 minutes for each time pressed.
|
|
‘1’ and ‘2’ Display
|
Connection Indicator lights shine
green when heating has
started. |
|
Overload Display
|
Overload indicator light shines when
the power surpasses 300W, and the alarm buzzer will
sound. |
|
Start/Stop Key |
Press Start/Stop key
to start or stop the device after setting the
temperature and
timer. |
|
|
|
ENJOY AN AROMATIC
INFRARED SPA EXPERIENCE! |
Place a few drops in a
ceramic diffuser. |
|
|
Aromatherapy Essential Oil
Sets of 10 or 5 |
Rosemary, Eucalyptus, Lavender,
Citronella, Bergamot, Tea Tree, Patchouli, Peppermint,
Orange, Lemon
|
|
|
|
INFRARED Sauna Wrap
PH-2B II INSTRUCTIONS: |
1. |
Place the Infrared Sauna Wrap on a flat
surface, such as the bed or floor. |
2. |
Wrap your body in the blanket. If a massage or body oil is
used, then it is recommended to first wrap the body in a
plastic film or sheet to protect the thermal blanket. |
3. |
Put the control box on a flat surface such as a table and
insert the plug into the main power socket. |
4. |
Connect the leads labeled ‘1’ and ‘2’ between the control
box and the thermal blanket. Connect lead ‘1’ to jack ‘1’ and
lead ‘2’ to jack ‘2’, otherwise the heating system will not
work. |
5. |
Turn the main power switch on at the rear of the control
box. The red ‘Power’ indicator on the control panel will
light. The device has not started working yet. |
6. |
Press the ‘ON/OFF’ key to start setting
the temperature and the timer. |
7. |
Press ‘Timer
’ to set the working time. For each press,
the time will increase or decrease by 5 minutes. The default
time is 40 minutes. |
8. |
Press ‘Temperature
’ to set the working temperature. For each
press, the temperature will increase or decrease by
1°Centigrade. Set the temperature to your specific
requirements. The default temperature is 42°C. |
9. |
Press ‘Start/Stop’ key. The green
indicators ‘1’ and ‘2’ will
light, showing that heating has started. |
10. |
When the heating timer counts down to ‘0’, a signal will
sound three times and the digital timer will display ‘0’
showing that heating has finished. |
11. |
After using the Infrared Sauna Wrap, pull the plug out
from power source. |
12. |
If at any time you need to stop the session, just press
the ‘Start/Stop’ key. When the green
indicators go out, the system has stopped working. |
13. |
Wipe the sweat from the surface of the thermal blanket
with a wet towel and dry the thermal blanket by laying it flat
on a bed or table for more than 1 hour. |
14. |
Fold the blanket and store it in a cool,dry place.
|
|
|
Suggested Use:
|
1. |
When the room temperature is lower than 20 °C, you may
preheat the blanket for 10 minutes prior to use. |
2. |
It is suggested that you be well hydrated by drinking a
glass of water prior to using. |
|
|
INFRARED Sauna Wrap PH-2B II
TECHNICAL SPECIFICATIONS: |
Model
No. |
PH-2B
II |
Input
Volts |
100V ~120V
60Hz / 220V ~240V 50Hz |
Output
Volts |
DC36V
|
Material
|
Made of Nylon,
covered by a layer of PU (polyurethane) fabric, with heating
elements of Space Carbon Fiber |
Input
Power |
150W(Max.)
|
Control
Panel |
Manual Control
|
Heating
Zones |
2 (2
connections controlled simultaneously) |
Temperature
|
30°C ~ 60°C |
Separate Heating Zone
Control |
N/A |
Timer |
5~95 minutes |
Size |
180 x 92 cm / 70" x 36 1/4"
|
Net Weight |
8.1kg |
Warranty |
1 year |
|
INFRARED SAUNA WRAP PH-2BII |
|
|
• |
BEST SELLER! |
• |
2 Connections controlled
simultaneously |
• |
Low Voltage
DC36V |
• |
Width x Length:
180 x 200 (cm) |
• |
Temperature: 30°C~60°C |
• |
Manual Control
|
|
Price $470.00
|
|
|
|
Free Shipping To Lower
48 States |
|
These Infrared Heat Devices are not medical products.
Not intended to diagnose, treat, cure or prevent any disease. If you are uncertain whether you can use any of these products, please consult your physician before using it. The
information and statements made are for
education purposes and are not intended to
replace the advice of your family doctor.
|
|